Recently added item(s)
Cart Subtotal
$199.00
Product Description
$27.99
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps
In stock
Email to a friendRelated Products
The Super Deluxe Ultimate is the shock of choice for the podium.
This is the most advanced shock Rockshox has ever made, packed to the hilt with more options for fine-tuning adjustments that meaningfully improve suspension performance. • 205 × 65mm • RC2T damper • Threshold lever for added peddling efficiency.
The M6100 chain provides smooth shifting and enhanced chain retention thanks to an extended portion of the inner plate. The new chain features QUICK-LINK assembly and is optimized for HYPERGLIDE+ cassettes and DYNAMIC CHAIN ENGAGEMENT+ chainrings.
• Proprietary design ensures smooth shifting and strength
• Extended inner plate improves chain engagement and retention
• Shorter shift times and less pedaling shock
• Optimized to work with HYPERGLIDE+ cassette sprockets and DYNAMIC CHAIN ENGAGEMENT+ chainrings
Of all the components that make up a mountain bike drivetrain, the shifter doesn’t exactly get a lot of spotlight time. But as the rider’s literal command and control centre, the GX Eagle™ shifter is more than worthy of recognition. With intuitive thumb actuated triggers, the positive feel gives the right rider input to make shifts crisp and discernible every time. What’s more, its already legendary reliability continues for all-day epics, and all-time experiences.
• Aluminium trigger designed for a positive lever feel.
• Includes bar clamp
• MatchMaker™X compatible.
Microspline Freehub bodies for DT Swiss will enable you to convert your DT Swiss hubs from Shimano HG and SRAM XD to Shimano Microspline
- Fits DT 180, 240, 350 & 440 Hubs
- 12×142/148 End Cap
- Replacement freehub body
- Ratchet EXP and ratchet freehub bodies are NOT interchangeable
ULTRA LIGHTWEIGHT XC WEAPON
32 Step-Cast’s pioneering lower leg shape isn’t just for looks, its narrow stance and stepped design saves weight, decreases frontal area, and provides clearance for the spokes and brake rotor. • Wheel size: 29” • Travel: 100mm • Damper: FIT4
New Name, familiar shape.
Praxis seamlessly merges tradition with modernity, bringing back the beloved Podium shaped pedal. With blessings from Gamut's founders, this revival isn't just about its return; it signifies our dedication to honoring the history of this iconic pedal design.
DESIGN
With meticulous attention to detail, we have preserved the essence of the original Podium pedal so cherished by riders, while incorporating a variety of updates for today's trail riding
LOW PROFILE
With three Enduro bearings and an Igus bushing, this design ensures a low-profile configuration, enabling smooth rotation on a heat-treated 4140 chromoly axle
The Rekon is an aggressive trail tire inspired by the Ikon for intermediate and technical terrain. Wide knobs down the middle provide control under braking and L-shaped side knobs assure support when carving loose turns. With confidence like this you can race more and scout less with the Rekon.
- 3C MaxxTerra Available
- Designed for aggressive XC trails
- Reinforced EXO construction Available
- Wide trail (WT) casing is optimised for 30-35mm inner width rims
This is the most advanced carbon fiber handlebar on the market and a rider favourite for all disciplines from trail to DH. Get industry-leading compliance and strength with the OneUp V2 Carbon Handlebar, so you can ride harder for longer.
• Clamp: 35mm
• Rise: 50mm
• Width: 800mm
$246.00
XTR SM-CRM95 race performance chainring delivers smooth and responsive peddling over bumpy terrain. The SM-CRM95 chainring features SHIMANO DYNAMIC CHAIN ENGAGEMENT+ technology, which features special gear teeth profiles that deliver exceptional chain engagement and chain retention.
• Options: 32 and 34t
• Weight: 34 tooth is approximately 84 grams
Riders want the derailleur to do its job shifting on command, whether under climbing load or the stage finish. The GX Eagle™ derailleur gets it done with an updated cage architecture that improves chain management. Refined to work with the new 10-52t cassettes, it’s also backwards compatible for the 10-50t versions. Giving riders choice, because that’s how it should be. Finished with the new GX Eagle™ master colorway – to compliment any cassette and chain colorway a rider wants from the Eagle™ Colorsystem. Further proof that the GX Eagle™ derailleur is there for one thing – to do the job.
• Compatible with sram eagle ecosystem
• Cable operated
The strongest system is a chain with no weak links. Eagle chain links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. And it’s also the biggest contributor to the ultra-smooth, precise, durable and quiet performance found in the 10-50 and the new 10-52 tooth cassette and X-SYNC 2 chainrings.
*This product does not come in standard consumer packaging*
• Hollow pin
• Fits into all 12speed eagle systems
• Chrome plated finish
The strongest system is a chain with no weak links. Eagle chain links have a smooth radius, with no sharp edges or chamfers, which yield a significant reduction in noise, friction and wear. This design also allows for a flatter plate, which means more consistent chain riveting and greater overall strength. And it’s also the biggest contributor to the ultra-smooth, precise, durable and quiet performance found in the 10-50 and the new 10-52 tooth cassette and X-SYNC 2 chainrings.
*This product does not come in standard consumer packaging*
• Hollow pin
• Fits into all 12speed eagle systems
• Chrome plated finish
$119.00
Material: aluminum
Compatibility: Yeti SB100, SB130, SB150, SB4.5, SB5.5, SB6, SB5+
Power of locked-in flats.
Turbine is the most concave flat pedal designed for climbing, mobbing descents and tackling the most demanding terrain where riders are all-in on grip. Covered by our Lifetime Warranty inclusive of crashes and available in seven colors. The most locked-in feel you can get on traditional flat pedals,for when good grip just isn’t good enough.
• Chromoly steel Axle
• 6061 aluminum body, steel pins
• Lifetime warranty