Showing 361–384 of 651 results
$29.00
Maxima High Temp Brake Fluid lubricates and protects brake components while providing consistent and reliable stopping power. It's capable of withstanding extremely high temperatures and maintains responsiveness and performance by resisting water contamination and vaporisation.
Add to cart
$20.00
Add to cart
Maxima Electrical Contact Cleaner is a blend of special cleaning agents that quickly removes grease, oil and other contaminants. The extra heavy propellant charge provides maximum spray pressure for those hard to reach areas. Its heavy duty shop formula is citrus scented, quick drying and safe for most plastics. Also, Maxima Citrus Electrical Contact Cleaner is ideal for use on engine parts, throttle bodies, ignitions, relays, plugs and much more. Contains no CFC’s! 369g/13oz aerosol spray. (Flammable! Do not spray near open flame.)
$69.00 – $129.95
Select options
Greg Minnaar’s signature tire
The Maxxis Assegai – provides tenacious, predictable grip across the entire profile no matter the lean angle. The Assegai can be used front and rear for a surefooted feel or as a front paired with a faster rolling rear tire.
•Dual compound, 3C MaxxTerra, or 3C MaxxGrip options
•60 TPI, DoubleDown (2×120 TPI), or Downhill (2×60 TPI) casing options
•EXO or EXO+ puncture protection options
•Wide Trail (WT) sizes are optimized for 35mm inner width rims
•Select specs are Tubeless Ready (TR), confirm in table below
$49.00 – $89.95
Select options
Troy Brosnan’s Go-Fast Signature Tyre
Troy wanted a “unicorn” of a tyre – a center tread design that carried speed easily but with edge blocks worthy of world-class cornering speed. Using our Rekon, Minon DHF, and High Roller II tread patterns as a starting point, Troy and our engineering team began development on the Dissector during the 2018 World Cup season. • Recommended as a rear tyre • Ideal for dry, fast tracks and bike parks • Wide Trail (WT) casing is optimized for 30-35mm inner rim widths
$49.00 – $99.00
Select options
The standard by which all tyres are judged.
With a tread design that deftly balances rolling speed with braking and cornering traction, it’s hard to find fault with the Minion DHF. That’s probably why it’s one of the most imitated tires in mountain biking. Whether riding local trails, a backcountry epic, racing enduro or World Cup downhill, there’s a Minion DHF spec to meet your needs. The Minion DHF is available in trail, enduro, and downhill specs.
- Ramped, directional tread design
- Large cornering blocks
- Single-ply, DoubleDown, and DH casings available
- 3C MaxxTerra, 3C MaxxGrip, and Super Tacky available on select models
- Wide trail (WT) casing specs are optimized for 30-35mm inner width rims
$14.95
Add to cart
Ensure your hydraulic brakes are running at their best by using this 1 litre container of Shimano Mineral Oil. Give your brake service a service for the proper maintenance of Shimano hydraulic disc brakes.
$299.00
Add to cart
Want to try some different tyre patterns? This is for you!
4 Different 29" Maxxis tyres
• 1x Maxxis Minion DHF Tyre 29x2.5 EXO+ 3C MaxxTerra TR • 1x Maxxis Assegai Tyre 29 x 2.5 WT MaxxGrip EXO+ TR Fold 120 TPI • 1x Maxxis Dissector Tyre 29 x 2.4 WT EXO TR • 1x Tyre Maxxis Aggressor 29x2.5 EXO TR(Please note no variations are available)
$14,499.00 – $20,999.00
Read more
PERFORMANCE UNLEASHED
The flagship Mondraker e-bike that boasts a new level of performance, achieved from the latest frame design and ZERO suspension kinematics, with seamless integration of the powerful new Avinox drive system.
Frame Material: Carbon
Wheel size: MX
Front travel: 170mm
Rear travel: 165mm
Drive Unit: Avinox Drive Unit
Battery size: Avinox 800 Wh
IN STORE 9TH OF APRIL
CONTACT US TO PREORDER
$79.00
Add to cart
PODIUM MUD GUARD
Keep the mud off your fork and out of your eyes with the official FOX Mud Guard designed specifically for FOX Podium models. This direct-mount fender uses a proprietary and sturdy 4-point attachment to secure to the fork.
$479.95
Select options
EXCEPTIONAL PROTECTION AND ADJUSTABILITY
The Leatt 4.5 neck brace has 2-way thoracic adjustability for a great fit, it sits between the 3.5 and 5.5 in the way of adjustment and price. A composite matrix platform offers not only strength but also a very lightweight neck brace you won’t know you're wearing. Our neck braces are designed to transfer potential injury-producing forces away from the neck during an impact, to other body parts in a safe and efficient manner, thereby reducing your risk of a neck injury. Feel protected and ride with confidence.
$319.00
Add to cart
We believe the best components should perform while going unnoticed and designed the Daemon flat pedal with this in mind.
The pedal features a gentle 2mm platform concave and a total concave of 7mm with our 5mm long, stainless steel pins. While not the largest pedal on the market, the 112mm long and 103mm wide platform with a gentle taper to the outline provides a large contact area while minimizing pedal strikes, remaining comfortable and supportive.
Precision CNC machined in Whistler, BC.
$49.95
Select options
Introducing the all new ELITE PRO v2.1 Lock-On Grips. Engineered to provide more padding where you need it most without the bulky feel – so you can enjoy the ride longer.
- Ergonomic design conforms to riders hand without feeling bulky, provides padding where it is needed most
- Half-Waffle pattern on the front of the grip provides extra control when you are off the back of the bike
- Reinforced End molded out of soft, but durable material to prevent grip blowout.
$49.00
Add to cart
Designed and tested by multiple time world cup DH Champion Aaron Gwin to meet the rigorous demands of world class downhill racing while also improving aero performance and the overall appearance of the bike
PRODUCT FEATURES:
- Curved design allows rear cables to be tucked out of view behind plate
- Low profile design allows full field of vision
- Easy installation / removal using zip-ties (Zip-Ties not included)
- Durable but flexible fiber reinforced polymer construction allows plate to easily flex to fit onto fork stantion tubes where pre configured zip-tie groves make installation simple
- Available in 5 colors: Black, Blue, Red, Orange, and Grey
$44.00
Add to cart
Engineered to withstand the toughest conditions of elite enduro racing, this number plate also enhances aerodynamic efficiency and elevates your bike’s look. Its distinctive offset mounting system enables adjustable positioning relative to the handlebars, allowing cable routing either in front or behind the plate. Compatible with nearly all handlebar types, it features a durable yet flexible reinforced design and multiple attachment points along the perimeter for maximum adaptability.
• Multiple offset options for improved cable routing
• Low profile design allows full field of vision
• Comes with two sizes of mounting adaptors
• Easy installation / removal using zip-ties (Zip-Ties included)
$149.00
Add to cart
Not just for enduro racers.
The OneUp Bash Guide is equally at home on your trail bike, where the extra bash protection is a must for aggressive riders or on your DH rig. With the popularity of clutch derailleurs, it is no longer necessary to run a chain guide with a lower roller to effectively tension your chain. DH racers and Bike Park rippers will appreciate the huge reduction in drag with the elimination of the lower roller, without sacrificing any strength or chain retention
• Includes 3 bash plates
• ISCG05 mount
• Single tool install and adjustment
$244.99
Select options
Strong, lightweight & vertically compliant.
The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer. The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right. • Material: Carbon • Bore: 35mm • Rise: 20mm or 35mm
$69.00 – $79.99
Select options
The OneUp Composite Pedals features a huge (115x105mm) super grippy platform with 10 rear-loading steel pins per side to keep your feet planted on even the roughest of trails. With a weight of only 355g, they won’t slow you down on the climbs. Designed from stealth rubber down and shaped with a subtle convex profile to provide you with more grip thanks to the pedal sitting in the natural arch of your foot. The thin leading edge chamfered design gives you maximum clearance to reduce pedal strikes and deflect off trail obstacle.
- 40 rear loading threaded pins with nyloc nuts
- DU plus cartridge bearing axle system
- Thin leading edge chamfered design to deflect off obstacles
- Wide platform design for increased stability
- Contoured shape provides ultimate connected feel
$63.00
Select options
The included 9 function Multi Tool contains your most used tools and is designed to live inside your stem/steerer tube.
⬢ 2, 2.5, 3, 4, 5, 6, 8mm
⁕ T25 Torx
▬ Flat Head Screwdriver
- Light weight (Adds just 75g to your bike)
- VERY easy to install in less than 5 mins.
- Available in 6 colours (Black, Red, Blue, Green, Orange, Purple, Turq)
- No need to remove your star nut or thread your steerer tube.
- Colour matched to our Composite Pedals, Grips and Handlebar Decals.
- Run a single Multi Tool on all your bikes (extra carriers are $15 each)
$64.99
Add to cart
The EDC Plug & Plier Kit is the perfect addition to the EDC V2 Tool.
The Tire Plug Jabber Tool, with Bacon Strips, threads directly into the bottom of the EDC V2 Tool and the Quick Link Breaker Pliers are designed to be stored around the Jabber tool in the EDC V2 Tool's large storage capsule.
The Quick Link Breaker Pliers are compatible with all 10,11, and 12 speed quick links chains.
Includes:
- Quick Link Breaker Pliers (10, 11, 12SP)
- Tire Plug Jabber Tool
- 15 - Bacon Strips (Tire Repair Plugs)
$104.00
Add to cart
The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish.
$20.00
Add to cart
The EDC Pump Bottle Cage Mount is compatible with our 70cc and 100cc EDC pumps. It includes a stretch polyurethane strap to secure the pump in place for rattle-free storage.
Did you lose your pump strap? Additional polyurethane straps to secure your EDC Pump are available for purchase.
Material: Glass Reinforced Nylon
Compatible with: bikes with water bottle mounts
Colors: Black
$66.00
Select options
Important Check Fork Compatibility before purchasing
A Threadless, no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube. EDC Tool sold separately.
The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool.
Easy to install in less than 10 minutes. Install instructions
$109.00
Add to cart
EDC V2 Tool
Whether you’re going out for a quick lunch ride or setting off on a longer adventure, EDC means you have all the tools that you need to keep your bike running smoothly. The 20-function EDC Tool is the heart of the EDC system.
• 20 functions
•Compact and stealthy
•Storage capsule
$27.99
Add to cart
Everything you need to fully rebuild your OneUp Composite Pedals.
KIT CONTAINS
- 2 CARTRIDGE OUTER BEARINGS
- 2 INNER DU BEARINGS
- 2 OUTER SEALS
- 2 AXLE NUTS
MAINTENANCE INSTRUCTIONS
1. remove outer and inner end caps with 6mm hex key.
2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut.
3. pull axle out of pedal body
4. push inner bearing out with 6mm hex
5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it.
6. remove axle seal (take note of direction)
REPLACEMENT INSTALL
1. grease new bushing and axle. Place bushing on axle and push it into pedal body.
2. replace pedal seal (thicker portion near flange of axle)
3. grease and place new bearing back into pedal body
4. slide axle through pedal body and bearing
5. replace axle nut
6. replace both end caps